The spring is a mechanical part that uses elasticity to work and it’s made of spring steel. There are many different kinds of springs, According to the force properties, spring can be divided into tensile spring, compression spring, torsion spring and bending spring, According to the shape it can be divided into disc spring, annular spring, plate spring, spiral spring, truncated cone vortex spring and torsion bar spring, According to the production process can be divided into cold spring and hot spring. We mainly produce Agricultural machinery spring, garage door springs, gate springs and vending machine springs, etc. We can also provide OEM\ODM custom service for variety of spring products.

Garage Door Bearing Bracket Sectional Garage Door Accessories

There are two types of end bearing plates: supported and unsupported. The supported end bearing plate is mostly being used for standard systems; 12 inches and up clearance between top of door opening to the ceiling. The supported end bearing plate is mounted to the flag bracket, to the punch angle of the horizontal track and to the header/jamb. The unsupported end bearing plate is mostly being used for low clearance systems; less than 12 inches clearance between the top of door opening to the ceiling. The unsupported end bearing plate is mounted to the flag bracket and/or to the horizontal track punch angle only.

Learn More
  • Product : Center Garage Door Bearing Bracket
  • Material : galvanised Steel, steel
  • Surface treatment: zinc plating
  • Packaging: Carton, pallet
  • OEM: Accept
  • Size: 86mm, 111mm, 127mm, 152mm

Center Garage Door Bearing Bracket

There are two types of end bearing plates: supported and unsupported. The supported end bearing plate is mostly being used for standard systems; 12 inches and up clearance between top of door opening to the ceiling. The supported end bearing plate is mounted to the flag bracket, to the punch angle of the horizontal track and to the header/jamb. The unsupported end bearing plate is mostly being used for low clearance systems; less than 12 inches clearance between the top of door opening to the ceiling. The unsupported end bearing plate is mounted to the flag bracket and/or to the horizontal track punch angle only.

Learn More
  • Product : Center Garage Door Bearing Bracket
  • Material : galvanised Steel, steel
  • Surface treatment: zinc plating
  • Packaging: Carton, pallet
  • OEM: Accept
  • Size: 86mm, 111mm, 127mm, 152mm

Garage Door Bottom Lifting Brackets

Garage door bottom corner brackets - for residential or light commercial garage doorsCompatible with garage doors up to 2" thickMilford pin cable attachment (inside hookup loop style cable attachment)For use with 2" trackSold as a pair5-11/16"L x 2-11/16"W x 1-1/4"flange

Learn More
  • Product : Bottom Brackets
  • Material : galvanised Steel, steel
  • Application : Garage door bottom corner brackets
  • Surface treatment: zinc plating
  • Packaging: Carton, pallet
  • OEM: Accept

Garage Door Bottom Corner Brackets (pair)

The garage door bottom brackets attach to the bottom corners of the bottom section. The corner brackets hold the bottom roller in place and the extension spring cable or torsion spring cable is attached to the bracket. It's not uncommon after many years and due to the fact that the bottom brackets are next to the garage floor water & moisture can cause the brackets to rust and eventually break.

Learn More
  • Product : Bottom Brackets
  • Material : galvanised Steel, steel
  • Application : Garage door bottom corner brackets
  • Surface treatment: zinc plating
  • Packaging: Carton, pallet
  • OEM: Accept

Galvanized Garage Door Shaft Bracket Center Bearing Support

The center support bracket is mounted to the spring pad above the header of the garage door opening with lag screws (not included). The torsion spring (or springs) are attached to the center support bracket with bolts & nuts.

Learn More
  • Product : Center Support Bracket
  • Material : galvanised Steel, steel
  • Application : Center Support Bracket for garage door torsion spring
  • Surface treatment: zinc plating
  • Packaging: Carton, pallet
  • OEM: Accept

Center Support Bracket for garage door torsion spring

The center support bracket is mounted to the spring pad above the header of the garage door opening with lag screws (not included). The torsion spring (or springs) are attached to the center support bracket with bolts & nuts.

Learn More
  • Product : Center Support Bracket
  • Material : galvanised Steel, steel
  • Application : Center Support Bracket for garage door torsion spring
  • Surface treatment: zinc plating
  • Packaging: Carton, pallet
  • OEM: Accept

Garage Door Torsion Springs With Cones - COPY - COPY

We can accept the custom all kinds of garage door torsion spring, pls provide us the drawing ,quantity so that we will quote for you A.material B. thickness(or sheet sizes) C. free length and width D. drawings with details E. quantity needed

Learn More
  • Product : Garage Door Torsion Springs With Cones
  • Material : Stainless steel;Carbon steel;Copper;According to customer demand
  • Surface treatment: Hardening;Polish;Anodized;Sandblasting;Powder coating;Vacuum Plating;Nickel;

Garage Door Torsion Springs With Cones

We can accept the custom all kinds of garage door torsion spring, pls provide us the drawing ,quantity so that we will quote for you A.material B. thickness(or sheet sizes) C. free length and width D. drawings with details E. quantity needed

Learn More
  • Product : Garage Door Torsion Springs With Cones
  • Material : Stainless steel;Carbon steel;Copper;According to customer demand
  • Surface treatment: Hardening;Polish;Anodized;Sandblasting;Powder coating;Vacuum Plating;Nickel;

Garage Door Torsion Springs

We can accept the custom all kinds of garage door torsion spring, pls provide us the drawing ,quantity so that we will quote for you

Learn More
  • Product : Garage Door Torsion Springs
  • Material : Stainless steel; Carbon steel; Copper;
  • Surface treatment: Hardening;Polish;Anodized;Sandblasting;Powder coating;Vacuum Plating;Nickel
  • OEM: Available

GET IN TOUCH

Send Us a Message

Since the year of 2010, we have been providing OEM service for old and new customers from more than 40 countries. We have realized to provide fast, stable and reliable One-Stop services for the customers.